Chapter 18 VPN
LTE3316 Series User’s Guide
122
18.3 L2TP Server
Click
Configuration > Application > VPN > L2TP VPN
to open the following screen. Use this screen to
configure the Zyxel Device L2TP VPN settings.
Figure 68
Configuration > Application > VPN > L2TP VPN
The following table describes the labels in this screen.
Table 49 Configuration > Application > VPN > L2TP VPN
LABEL
DESCRIPTION
Configuration
Enable
Select this to configure the Zyxel Device L2TP VPN functions as a server.
Service Port
This is the default L2TP VPN service port on the Zyxel Device. If you change this, you must let
clients know what the new L2TP VPN service port is.
Server Virtual IP
Select the IP address used to establish the VPN tunnel connection.
IP Pool Starting
Address
Enter the pool’s starting IP address that the Zyxel Device uses to assign to the L2TP VPN clients.
Note: These addresses use a 24-bit netmask and should not conflict with any WAN,
LAN, or WLAN subnet even if they are not in use.
IP Pool Ending
Address
Enter the pool’s ending IP address that the Zyxel Device uses to assign to the L2TP VPN clients.
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...
