ZyXEL Communications LTE3316-M604 User Manual Download Page 170

Page: 170 / 193

LTE3316 Series User’s Guide

170

HAPTER

Troubleshooting

26.1 Overview

This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.

•

Power, and Hardware Installation

•

Zyxel Device Access and Login

•

Internet Access

•

Wireless Connections

26.2 Power, and Hardware Installation

The Zyxel Device does not turn on. None of the LEDs turn on.

Make sure the Zyxel Device is correctly installed (refer to your Quick Start Guide).

Press the power button to turn the Zyxel Device on. See

Section 1.5.2 on page 16

and

Section 1.5.1 on

page 15

If the problem continues, contact the vendor.

26.3 Zyxel Device Access and Login

I forgot the password for the Zyxel Device.

The default IP address is 192.168.1.1.

If you changed the IP address and have forgotten it, you have to reset the device to its factory defaults.
See

Section 1.5.2.3 on page 18

Summary of Contents for LTE3316-M604


































































































































































































Search results

Summary of Contents for LTE3316-M604

Reviews:

Related manuals for LTE3316-M604

Brands by name

Popular brands

ZyXEL Communications LTE3316-M604, User Manual

Search results

Summary of Contents for LTE3316-M604

Reviews:

Related manuals for LTE3316-M604

Brands by name

Popular brands