Chapter 10 DHCP Server
LTE3316 Series User’s Guide
94
10.4 DHCP Client List
The DHCP table shows current DHCP client information (including IP address, Host Name and MAC
address) of network clients using the Zyxel Device’s DHCP servers.
Configure this screen to always assign an IP address to a MAC address (and host name). Click
Configuration > Network > DHCP Server > Client List
.
Note: You can also view a read-only client list by clicking
Monitor > DHCP Server
.
Figure 46
Configuration > Network > DHCP Server > Client List
The following table describes the labels in this screen.
Table 33 Configuration > Network > DHCP Server > Client List
LABEL
DESCRIPTION
#
This is the index number of the host computer.
Status
This field displays whether the connection to the host computer is up (a yellow bulb) or down (a
gray bulb).
Host Name
This field displays the computer host name.
IP Address
This field displays the IP address relative to the # field listed above.
MAC Address
This field shows the MAC address of the computer with the name in the
Host Name
field.
Every Ethernet device has a unique MAC (Media Access Control) address which uniquely
identifies a device. The MAC address is assigned at the factory and consists of six pairs of
hexadecimal characters, for example, 00:A0:C5:00:00:02.
Reserve
Select this if you want to reserve the IP address for this specific MAC address.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...
