Chapter 23 Universal Plug-and-Play (UPnP)
LTE3316 Series User’s Guide
146
When a UPnP device joins a network, it announces its presence with a multicast message. For security
reasons, the Zyxel Device allows multicast messages on the LAN only.
All UPnP-enabled devices may communicate freely with each other without additional configuration.
Disable UPnP if this is not your intention.
23.3 UPnP Settings
Use this screen to enable UPnP on your Zyxel Device.
Click
Configuration > Management > UPnP
to display the screen shown next.
Figure 83
Configuration > Management > UPnP
The following table describes the fields in this screen.
23.4 Turn on UPnP in Windows 7 Example
This section shows you how to use the UPnP feature in Windows 7. UPnP server is installed in Windows 7.
Activate UPnP on the Zyxel Device by clicking
Network Setting > Home Networking
> UPnP
.
Make sure the computer is connected to the LAN port of the Zyxel Device. Turn on your computer and
the Zyxel Device.
1
Click the start icon,
Control Panel
and then the
Network and Sharing Center.
Table 62 Configuration > Management > UPnP
LABEL
DESCRIPTION
UPnP
Select
Enable
to activate UPnP. Be aware that anyone could use a UPnP application to
open the Web Configurator's login screen without entering the Zyxel Device's IP address
(although you must still enter the password to access the Web Configurator).
Apply
Click
Apply
to save the setting to the Zyxel Device.
Cancel
Click
Cancel
to return to the previously saved settings.
Summary of Contents for LTE3316-M604
Page 12: ...12 PART I User s Guide...
Page 40: ...40 PART II Technical Reference...
