Chapter 9 Wireless LAN
EMG6765-Q10A User’s Guide
89
9.9 WPS Station Screen
Use this screen when you want to add a wireless station using WPS. To open this screen, click
Network
>
Wireless LAN 2.4G/5G
>
WPS Station
.
Note: After you click
Push Button
on this screen, you have to press a similar button in the
wireless station utility within 2 minutes. To add the second wireless station, you have to
press these buttons on both device and the wireless station again after the first 2
minutes.
Figure 44
Network > Wireless LAN 2.4G/5G > WPS Station
The following table describes the labels in this screen.
9.10 Scheduling Screen
Use this screen to set the times your wireless LAN is turned on and off. Wireless LAN scheduling is disabled
by default. The wireless LAN can be scheduled to turn on or off on certain days and at certain times. To
open this screen, click
Network
>
Wireless LAN 2.4G/5G
>
Scheduling
tab.
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to reload the previous configuration for this screen.
Table 27 Network > Wireless LAN 2.4G/5G > WPS (continued)
LABEL
DESCRIPTION
Table 28 Network > Wireless LAN 2.4G/5G > WPS Station
LABEL
DESCRIPTION
Push Button
Use this button when you use the PBC (Push Button Configuration) method to configure
wireless station’s wireless settings.
Click this to start WPS-aware wireless station scanning and the wireless security information
synchronization.
Or input station’s PIN
number
Use this button when you use the PIN Configuration method to configure wireless station’s
wireless settings.
Type the same PIN number generated in the wireless station’s utility. Then click
Start
to
associate to each other and perform the wireless security information synchronization.
