Chapter 20 Parental Control
EMG6765-Q10A User’s Guide
138
Figure 78
Security > Parental Control
The following table describes the fields in this screen.
20.2.1 Add/Edit a Parental Control Rule
Click
Add
new rules
in the
Parental Control
screen to add a new rule or click the
Edit
icon next to an
existing rule to edit it. Use this screen to configure a restricted access schedule and/or URL filtering
settings to block the users on your network from accessing certain web sites.
Table 59 Security > Parental Control
LABEL
DESCRIPTION
General
Parental Control Select
Enable
to activate parental control.
Add new rules
Click this if you want to configure a new parental control rule.
Parental Control Rules
#
This shows the index number of the rule.
Status
This indicates whether the rule is active or not.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
Rule Name
This shows the name of the rule.
Home Network
User (MAC)
This shows the MAC address of the LAN user’s computer to which this rule applies.
Internet Access
Schedule
This shows the day(s) and time on which parental control is enabled.
Network Service This shows whether the network service is configured. If not,
None
will be shown.
Website
Blocked
This shows whether the website block is configured. If not,
None
will be shown.
Modify
Click the
Edit
icon to go to the screen where you can edit the rule.
Click the
Delete
icon to delete an existing rule.
Apply
Click
Apply
to save your changes.
Cancel
Click
Cancel
to restore your previously saved settings.
