Chapter 25 Maintenance
EMG6765-Q10A User’s Guide
174
The following table describes the labels in this screen.
25.4 Account Screen
It is strongly recommended that you change the password of the user account.
If you forget your login account password (or IP address), you will need to reset the device. See
and
for details.
Click
Maintenance
>
Account
. The screen appears as shown.
Figure 103
Maintenance > Account
The following table describes the labels in this screen.
25.4.1 Account Setup Screen
This screen allows you to change a user account password.
Table 74 Maintenance > General
LABEL
DESCRIPTION
System Name
System Name is a unique name to identify the EMG6765-Q10A in an Ethernet network.
Domain Name
Enter the domain name you want to give to the EMG6765-Q10A.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times out. The
default is 5 minutes. After it times out you have to log in with your password again. Very long idle
timeouts may have security risks. A value of "0" means a management session never times out,
no matter how long it has been left idle (not recommended).
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to exit this screen without saving.
Table 75 Maintenance > Account
LABEL
DESCRIPTION
User Account Entries
#
This is the index number of a user account.
User Name
The EMG6765-Q10A’s user account name.
Group
The belonging of the user account.
Different login account types have different privilege levels. The web configurator screens and
privileges will vary depending on which account type you use to log in.
Modify
Click the
Edit
icon to open the Account Setup screen.
Account Setup
screen allows to change
the user account password.
