Chapter 13 NAT
EMG6765-Q10A User’s Guide
114
13.3.1 Port Forwarding Edit Screen
This screen lets you edit a port forwarding rule. Click a rule’s
Edit
icon in the
Port Forwarding
screen to
open the following screen.
Figure 62
Network > NAT > Port Forwarding Edit
The following table describes the labels in this screen.
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 46 Network > NAT > Port Forwarding (continued)
LABEL
DESCRIPTION
Table 47 Network > NAT > Port Forwarding Edit
LABEL
DESCRIPTION
Port Forwarding
Select
Enable
to turn on this rule and the requested service can be forwarded to the host with
a specified internal IP address.
Select
Disable
to disallow forwarding of these ports to an inside server without having to delete
the entry.
Service Name
Select
User define
and type a name (of up to 31 printable characters) to identify this rule in the
first field next to
Service Name
. Otherwise, select a predefined service in the second field next
to
Service Name
.
Protocol
Select the transport layer protocol supported by this virtual server. Choices are
TCP
,
UDP
, or
TCP_UDP
.
If you have chosen a pre-defined service in the
Service Name
field, the protocol will be
configured automatically.
Port
Type a port number(s) to define the service to be forwarded to the specified server.
To specify a range of ports, enter a hyphen (-) between the first port and the last port, such as
10-.
Server IP Address
Type the IP address of the server on your LAN that receives packets from the port(s) specified in
the
Port
field.
Back
Click
Back
to return to the previous screen.
Apply
Click
Apply
to save your changes back to the EMG6765-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
