Chapter 10 LAN
EMG6765-Q10A User’s Guide
98
10.7 IGMP Snooping Screen
Use this screen to enable IGMP Snooping and configure IGMP mode. Click
Network > LAN > IGMP
Snooping
.
Figure 52
Network > LAN > IGMP Snooping
The following table describes the labels on this screen.
Autoconfiguration
Type
Select
SLAAC + RDNSS
to enable IPv6 stateless auto-configuration on this interface. The
interface will generate an IPv6 IP address itself from a prefix obtained from an IPv6 router in
the network.
Select
SLAAC + Stateless DHCPv6
to enable IPv6 stateless auto-configuration on this
interface. The interface will get an IPv6 address from an IPv6 router and the DHCP server. The
IP address information gets through DHCPv6.
Select
Stateful DHCPv6
to allow a DHCP server to assign and pass IPv6 network addresses,
prefixes and other configuration information to DHCP clients.
Static IP Address
Select this option to manually enter an IPv6 address if you want to use a static IP address.
LAN IPv6
Address
Enter the LAN IPv6 address you want to assign to your EMG6765-Q10A in hexadecimal
notation.
LAN IPv6 Prefix
Length (48~64)
Enter the 48 to 64 address prefix length to specify in an IPv6 address compose the network
address.
Prefix Preferred
Lifetime
Enter the preferred lifetime for the prefix.
Prefix Valid
Lifetime
Enter the valid lifetime for the prefix.
Link Local Only
Select this option to only use the link local address on the EMG6765-Q10A interfaces in the LAN.
ULA
Select this option to identify a unique local address of the EMG6765-Q10A in the LAN.
Apply
Click
Apply
to save your changes with the EMG6765-Q10A.
Cancel
Click
Cancel
to begin configuring this screen afresh.
Table 37 Network > LAN > IPv6 LAN (continued)
LABEL
DESCRIPTION
Table 38 Network > LAN > IGMP Snooping
LABEL
DESCRIPTION
IGMP Snooping
