EMG6765-Q10A User’s Guide
124
C
HAPTER
16
Interface Group
16.1 Overview
By default, all LAN and WAN interfaces on the EMG6765-Q10A are in the same group and can
communicate with each other. Each group acts as an independent network on the EMG6765-Q10A.
16.2 The Interface Group Screen
You can manually add a LAN and/or WLAN interface to a new group. Click
Network > Interface Group
to open the following screen.
Figure 70
Network > Interface Group
The following table describes the fields in this screen.
16.2.1 Add Interface Group
Click the
Add
button in the
Interface Group
screen to open the following screen. Use this screen to
create a new interface group.
Table 52 Network > Interface Group
LABEL
DESCRIPTION
Add
Click this to add a new interface grouping rule.
You must configure a WAN connection before you can add a new interface
grouping rule. See
for more information.
Interface Grouping Rules
Name
This shows the descriptive name of the group.
WAN Interface
This shows the WAN interfaces in the group.
LAN Interfaces
This shows the LAN and/or WLAN interfaces in the group.
Criteria
This shows the filtering criteria for the group.
Delete
Click the
Delete
icon to remove the group.
