ZyXEL Communications Dimension GS-3012, User Manual, Page: 245 / 259

GS-3012/GS-3012F User’s Guide
IEEE 802.1Q Tagged VLAN Commands 32-7
where
<vlan-id>
=
The VLAN ID [1 – 4094].
This command deletes the specified VLAN ID entry from the static VLAN table. The following example deletes
entry 2 in the static VLAN table.
Figure 32-9 no vlan Command Example
32.6 Enable VLAN
Syntax:
vlan <vlan-id>
This command enables the specified VLAN ID in the SVLAN (Static VLAN) table.
32.7 Disable VLAN
Syntax:
vlan <vlan-id>
inactive
This command disables the specified VLAN ID in the SVLAN (Static VLAN) table.
32.8 Show VLAN Setting
Syntax:
show vlan
This command shows the IEEE 802.1Q Tagged SVLAN (Static VLAN) table.
An example is shown next.
Figure 32-10 show vlan Command Example
ras(config)# no vlan 2
ras# show vlan
The Number of VLAN : 2
idx. VID Status Elap-Time TagCtl
---- ---- --------- ----------- ---------------------------------------
1 1 Static 0:14:39 Untagged :1-12
Tagged :
2 2000 Static 0:02:36 Untagged :
Tagged : 10-12
ras#