ZyXEL Communications Dimension GS-3012, User Manual, Page: 243 / 259

GS-3012/GS-3012F User’s Guide
IEEE 802.1Q Tagged VLAN Commands 32-5
frame-type <all|tagged>
where
<all|tagged>
= Specifies all Ethernet frames (tagged and untagged) or only tagged Ethernet
frames.
This command sets the specified port to accept all Ethernet frames or only those with an IEEE 802.1Q VLAN tag.
The following example sets ports 1 to 5 to accept only tagged frames.
Figure 32-6 frame type Command Example
32.5.3 Enable or Disable Port GVRP
Use the
gvrp
command to enable GVRP on the port(s). Use the
no gvrp
command to disable GVRP.
The following example turns off GVRP for ports 1 to 5.
Figure 32-7 no gvrp Command Example
32.5.4 Modify Static VLAN
Use the following commands in the config-vlan mode to configure the static VLAN table.
Syntax:
vlan <vlan-id>
fixed <port-list>
forbidden <port-list>
name <name-str>
normal <port-list>
untagged <port-list>
no fixed <port-list>
no forbidden <port-list>
no untagged <port-list>
where
<vlan-id> = The VLAN ID [1 – 4094].
<name-str> = A name to identify the SVLAN entry.
<port-list> = This is the switch port list.
ras(config)# interface port-channel 1-5
ras(config-interface)# frame-type tagged
ras(config)# interface port-channel 1-5
ras(config-interface)# no gvrp