ZyXEL Communications Dimension GS-3012, User Manual, Page: 229 / 259

GS-3012/GS-3012F User’s Guide
Command Examples 31-7
Figure 31-12 CLI: boot config Command Example
Use the reload config command to restart the system and use a different configuration file (if specified). The
following example restarts the system to use the second configuration file.
Figure 31-13 CLI: reload config Command Example
When you use the
write memory
command without specifying a configuration file index number,
the switch saves the changes to the configuration file the switch is currently using.
31.6.4 Resetting to the Factory Default
Follow the steps below to reset the switch back to the factory defaults.
1.
Enter
erase running config
to reset the current running configuration.
2.
Enter
write memory
to save the changes to the current configuration file. If you want to reset the second
configuration file, use the
write memory
command again with the specified index number.
The following example resets both configuration files to the factory default settings.
Figure 31-14 CLI: Reset to the Factory Default Example
31.7 Example no Commands
These are the commonly used command examples that belong to the
no
group of commands.
31.7.1 no mirror-port
Syntax:
no mirror-port
Disables port mirroring on the switch.
An example is shown next.
ras# boot config 2
ras# reload config 2
ras# erase running-config
ras# write memory
ras# write memory 2