ZyXEL Communications Dimension GS-3012, User Manual, Page: 219 / 259

GS-3012/GS-3012F User’s Guide
Introducing the Commands 30-25
Table 30-5 Command Summary: Interface
COMMAND DESCRIPTION
ingress-check Enables the device to discard
incoming frames for VLANs that
are not included in a port
member set.
intrusion-lock Enables intrusion lock on a port
and a port cannot be connected
again after you disconnected the
cable.
mirror Enables port mirroring in the
interface.
dir <ingress|egress|both> Enables port mirroring for
incoming, outgoing or both
incoming and outgoing traffic.
Port mirroring copies traffic from
one or all ports to another or all
ports for external analysis.
multicast-limit Enables the interface multicast
limit.
<pkt/s> Sets how many multicast packets
the interface receives per
second.
name <port-name-string> Sets a name for your interface.
Enter a descriptive name (up to
nine printable ASCII characters).
no
bandwidth-limit Disables bandwidth limit on the
switch.
broadcast-limit Disables broadcast storm control
limit on the switch.
dlf-limit Disables destination lookup
failure (DLF) on the switch.
egress set <port-list> Disables the outgoing traffic port
list for a port-based VLAN.
flow-control Disables flow control on the
switch.
gvrp Disables GVRP on the switch.
igmp-filtering profile Disables IGMP filtering on the
port.
igmp-group-limited Disables IGMP group limitation.
igmp-immediate-leave Disables IGMP immediate leave
on the port.
inactive
Enables the specified interface
on the switch.