ZyXEL Communications Dimension GS-3012, User Manual, Page: 116 / 259

GS-3012/GS-3012F User’s Guide
14-4 Link Aggregation
Figure 14-3 Link Aggregation: Configuration
The following table describes the labels in this screen.
Table 14-2 Link Aggregation: Configuration
LABEL DESCRIPTION
Link Aggregation Control Protocol
Active Select this checkbox to enable Link Aggregation Control Protocol (LACP).
System Priority LACP system priority is a number between 1 and 65, 535. The switch with the lowest system
priority (and lowest port number if system priority is the same) becomes the LACP “server”. The
LACP “server” controls the operation of LACP setup. Enter a number to set the priority of an
active port using Link Aggregate Control Protocol (LACP). The smaller the number, the higher
the priority level.
Group ID The field identifies the link aggregation group, that is, one logical link containing multiple ports
Active Select this option to activate a trunk group.