ZyXEL Communications Dimension GS-3012, User Manual, Page: 106 / 259

GS-3012/GS-3012F User’s Guide
11-2 Bandwidth Control
Figure 11-1 Bandwidth Control
The following table describes the labels in this screen.
Table 11-1 Bandwidth Control
LABEL DESCRIPTION
Active Select this check box to activate bandwidth control.
Port This field displays the port number.
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a rule
without deleting it by deselecting this check box.
Commit Rate Specify the guaranteed bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow
on a port. The commit rate should be less than the peak rate. The sum of commit rates cannot be
greater than or equal to the uplink bandwidth.
Peak Rate Specify the maximum bandwidth allowed in kilobits per second (Kbps) for the incoming traffic flow on
a port.
Egress Rate Specify the maximum bandwidth allowed in megabits per second (Kbps) for the out-going traffic flow
on a port. Enter a number between 1 and 1000.
Apply Click Apply to save the settings.
Cancel Click Cancel to reset the fields to your previous configuration.