50 / 121
User Manual 3000SP
Rev. 1.1 16/03/2021
Identification: MD-AL-GI-00
Rev. 1.1 of 16/03/2021 - Application: GID
A faster way to change the menu language is to press the “Menu/Back” key and “OK” key at the same time.
In firmware version V1.90, the languages available are Chinese, English, Italian, French, German, Slovak and
Ukrainian; future firmware updates may add new languages.
8.
Date and time
Select “8. Date and time” and press “OK” to enter the menu for setting the date/time. Set the date and time
using the “Up” and “Down” keys, then press “OK” to move to the next digit and confirm. The date and time
are expressed in the format: 20YY – MM - DD HH:MM:SS.
The date and time are shown at the bottom left of the main interface.
The correct setting of this menu is fundamentally important if you want to set the working mode %Charge
(for more information, see section 12 of this chapter).
9.
EPS Mode (Emergency Power Supply)
Select “9. Set EPS mode” and press “OK” to enter the menu for setting the EPS mode. The following screen
appears on the display.
9. Set EPS mode
1.
EPS setting
1. Enable EPS
Disable EPS
2.
Set EPS start-up time
***s
Select the menu “1. EPS setting” and press “OK” to enter; use the “Up” and “Down” keys to select between
“Enable EPS” and “Disable EPS”, then press “OK” to confirm.
If the Enable EPS option is set, select the menu “2. Set EPS start-up time” and press “OK”; use the “Up”
and “Down” keys to change the digit and “OK” to move to the next one. When the AC voltage is
interrupted, the EPS mode will enter into operation after the set time. This value can be set between 1
and 999 seconds.
For more information on EPS mode, refer to the appropriate procedure.
10.
DRMs0 Control (only for the Australian market)
Select “10. DRMs0 Control” and press “OK.” The display will show “Enter PWD!” Press “OK” to enter the
password “0001” and use the “Up” and “Down” keys to select the digit and “OK” to move to the next digit.
If the display shows “Incorrect, try again!” press the “Menu/Back” key and enter the password again.
