ZXR10 8900 Series Hardware Installation Manual
Result:
Power module of ZXR10 8902 has been plugged.
Unplug Power
Supply Module
To unplug power module of ZXR10 8902, perform the following
steps.
1. Loosen the captive screw on the bottom side of the module.
2. Hold the both captive screw on both sides of the power module
with hands. Pull it outward forcibly until it is pulled out.
Result:
Power module of ZXR10 8902 has been unplugged.
Installation of Fan Plug-in
Box
Installing Fan Plug-in Box of ZXR10
8912/8908/8905
The fan plug-in box used by ZXR10 8912, ZXR10 8908 and ZXR10
8905 are different in size, but which structures are the same.
Here, take ZXR10 8908 for an example to describe how to install
and remove fan plug-in box.
Plug Fan Plug-in
Box
To plug fan plug-in box of ZXR10 8908, perform the following
steps.
1. Align the fan plug-in box with its slot, as shown in
Figure 73
.
Plug the box along the upper and lower guide rails.
F
IGURE
73 P
LUGGING
F
AN
P
LUG
-
IN
B
OX
S
TEP
1
1.
Plug-in box
2.
Fan Plug-in Box
3.
Handle
4.
Captive Screw on the Fan
Plug-in Box
2. When the connector on fan plug-in box touches the connector
on the back-plate, as shown in
Figure 74
, push the box inside
76
Confidential and Proprietary Information of ZTE CORPORATION
Summary of Contents for ZXR10 8900 Series
Page 6: ......