Chapter 4 19” Standard Cabinet Installation
2. Plastic dustproof meshes must be installed at the air inlet of
each door. Plastic dustproof meshes use card to card installa-
tion mode, which is easy to separate.
i. As shown in
Figure 50
, press the activity wrench in the di-
rection of arrowhead to remove the plastic dustproof mesh.
ii. Clean the plastic dustproof mesh by warm water (≤40
℃
),
and dry it.
iii. Place the plastic dustproof mesh on the corresponding po-
sition of door. Press the activity wrench in the direction of
arrowhead as shown in
Figure 50
until the mesh is fixed.
F
IGURE
50 P
LASTIC
D
USTPROOF
1.
Door panel
2.
Activity wrench
3.
Cabinet door
Note:
Damp meshes can not be installed in cabinet.
Result:
The dustproof mesh has been cleaned and installed.
Installing Panel Wood
To install panel wood, perform the following steps.
1. Install back and front panel woods
Keep the connection hole of front and back panel woods and
the connection hole of cabinet installation frame on the same
line. Use screw to fix front and back panel woods, as shown in
Figure 51
.
Confidential and Proprietary Information of ZTE CORPORATION
55
Summary of Contents for ZXR10 8900 Series
Page 6: ......