ZXCBTS (V5.4) CDMA Micro Base Transceiver Station & Remote Station Installation Manual
4-2
Install the support
Installation on pole
Installation check
Install the sunshade cover
Install the cabinet
Indoors
Install the support
Outdoors
End
Installation on wall
Fig. 4.1-1 Flow of Installing the Cabinet
4.2 Installation Modes
Note
The cabinets of ZXCBTS micro-BTS/remote stations are the same in structure,
so is the installation method.
As shown in Fig. 4.1-1, the cabinet can be installed either on pole or on wall based on
the actual environment.
4.2.1 Installing Cabinet on Pole
1. Disassemble the support from the cabinet.
2. Secure the support onto the pole with fixing plates and 260mm-long bolts. The
diameter of the pole should be between 60mm and 90mm. 75mm is
recommended. See Fig. 4.2-1.
If the equipment is to be installed outdoors, face the front side southward and
the back side northward (This rule is applicable to the case that the equipment is