Chapter
5
Installation
of Power Supply System
5-5
Step 5: Screw to connect the component 5 with the component 6, as shown in Fig.
5.3-4.
1
2
3
5
4
6
Fig. 5.3-4 Assembling a Power Cable Connector (step 5)
Step 6: Push the components 2, 3 and 4 into the component 5, and then screw down the
component 1 onto the component 5. Be sure to screw the component 1 but not 5. See
Fig. 5.3-5.
1
5
6
Fig. 5.3-5 Assembling a Power Cable Connector (step 6)
5.3.2 Assembling 120V AC Power Cable Connector
The steps for assembling an AC power cable connector are the same as that for
assembling a DC power cable connector. The only difference is that the three-pin
connector and three-core power cable are used for AC power cables. Refer to the
preceding contents for the procedures and Table 5.3-1 for the corresponding
relationship between the core wires and the binding posts.
