Chapter
4
Installation
of Cabinet
4-3
installed in the Northern Hemisphere. If it is installed in the Southern
Hemisphere, the opposite rule should be applied).
3. Install the sunshade cover onto the support with four M4 bolts. See Fig. 4.2-4.
4. Hold the cabinet to hang it onto the support, then push it into the shelf. See Fig.
4.2-2.
5. Align the bolt holes on the support with those on the cabinet, and then screw
down four M8 hexagon bolts. See Fig. 4.2-3.
6. On the cabinet base there are hangers for rope. If necessary, use the rope to hang
the cabinet onto the pole.
See Fig. 4.2-1 for the schematic diagram of cabinet fastened on pole.
Flat washer
Bolt
M12 nut,
spring washer,
flat washer
Support
Pole
Fixing plate
Fig. 4.2-1 Schematic Diagram of Fastening the Cabinet onto the Pole (step 1)