![Zte Vital User Manual Download Page 101](http://html.mh-extra.com/html/zte/vital/vital_user-manual_941176101.webp)
Web and Data
91
Note:
Wi-Fi networks are self-discoverable, which means no additional steps are required for your
phone to connect to a Wi-Fi network. It may be necessary to provide a user name and password for
certain closed wireless networks.
Check the Wireless Network Status
Check the status of your current wireless network, including speed and signal strength, through the
Wi-Fi settings menu.
1. Touch
>
>
Settings
>
Wi-Fi
.
2. Touch the wireless network that the phone is currently connected to. You will see a message box
showing the Wi-Fi network name, status, speed, signal strength, and other details.
Note:
If you want to remove a wireless network’s settings, touch
Forget
on this window. You need
to enter the settings again if you want to connect to this wireless network.
Connect to a Different Wi-Fi Network
Use Wi-Fi settings to scan for and connect to a different Wi-Fi network.
1. Touch
>
>
Settings
>
Wi-Fi
. Detected Wi-Fi networks are displayed. To manually
scan for available Wi-Fi networks, touch
>
Scan
.
2. Touch another Wi-Fi network to connect to it.
Note:
If the wireless network you want to connect to is not in the list of detected networks, touch
+
on the bottom right of the screen, enter the wireless network settings and touch
Save
.
Turn on Wi-Fi Smart Mode
Smart Mode remembers the locations where you spend the most time and turns on Wi-Fi when you
are near those places. The Wi-Fi networks you have used before will be connected to automatically.
Smart Mode can also remember Sign In credentials for networks that require usernames and
passwords.
1. Touch
>
>
Settings
>
Wi-Fi
>
Smart Mode
.
2. Slide the Smart Mode switch to the
ON
position to turn this feature on.
Connect to a WPS Network
Wi-Fi Protected Setup (WPS) is a feature that makes it easy to add your phone to the access points
which supply WPS.
You can use one of the following methods to connect your phone to a wireless network using WPS.
Method one: WPS button (Recommended)