Connections Settings
189
●
Use WPS to Connect to a Wi-Fi Network:
From Wi-Fi settings, tap
Menu
>
Advanced
>
WPS Push Button
or
WPS Pin Entry
.
The settings are available when Wi-Fi is turned on.
If you tap
WPS Push Button
, press the WPS button on the access point and the access
point will recognize your phone and add it to the network.
If you tap
WPS Pin Entry
, enter the PIN number displayed on the phone into the access
point's setup page. Your phone automatically finds the access point and configures the
connection.
Note:
For detailed information about the WPS feature of the access point, please refer to its user
documents.
●
Allow Automatic Connection to Passpoint-certified Wi-Fi Access Points:
From Wi-Fi
settings, tap
Menu
>
Advanced
and tap the
Passpoint
slider.
●
Enable Notification when Open Networks Are Available
: From Wi-Fi settings, tap
and tap
the
Network notification
slider.
The setting is available when Wi-Fi is turned on.
Tap
Network notification
to turn the option on or off.
●
Set Timing for Pausing a Connection
: From Wi-Fi settings, tap
>
Keep Wi-Fi on during
sleep
and then select a setting.
●
Check MAC Address
: From Wi-Fi settings, tap
.
MAC Address appears below “MAC address.”
●
Check IP Address
: From Wi-Fi settings, tap
.
IP Address appears below “IP address.”
Wi-Fi Calling Settings
The Wi-Fi Calling settings menu lets you set your Wi-Fi Calling options, including updating your 9-1-1
information. For information about setting up Wi-Fi Calling, see
Wi-Fi Calling
.