C
HAPTER
3
D
ISASSEMBLY
P
ROCEDURES
42
9650-0804-01 Rev. A
•
1/2” nut driver
•
Large diagonal cutters
•
Strong glue, such as Loctite 420 or equivalent
•
Loctite needle tip dispenser
Safety Precautions
•
Only properly trained technicians should service the unit.
•
Make sure you take the necessary precautions when working with static sensitive units. For
example, you must wear a conductive wrist strap (which touches your skin) connected to a
grounding mat and to the earth ground.
Modules
The Propaq M unit contains the following six (6) modules or assemblies:
•
Front Enclosure
•
Display
•
NIBP
•
EtCO
2
(Oridion
®
)
•
Monitor Board
•
SpO
2
These modules can be purchased as replacement parts from the ZOLL Technical Support
Department. See Chapter 5, "Replacement Parts" for information on ordering replacement
parts.
Summary of Contents for Propaq M
