12
o
During alarm recording all buttons are disabled except the STOP button. If the STOP button is
pressed, the alarm recording will stop
.
o
If an alarm trigger is received while alarm recording is in progress, the recording duration for the
second alarm will be calculated from that point
.
o
When there is a power loss duration alarm recording, if the power is restored set during will continue.
(Note: Alarm counter an increase one more).
.
Alarm Recording Counter Display
During alarm recording, “
” will be flashing on the display panel.
The maximum display number of alarm triggers is “35” at the next alarm recording the counter will indicate
“00”. .
One-Shot Recording
One-Shot Recording Setting
9. Press the MENU, SHIFT
►
, SHIFT
►
button in sequenze to display the REC MODE SETUP menu.
10. Press the SHIFT
▼
button until the arrow mark (
►
) point to ONE-SHOT REC SETUP.
11. Press the SHIFT
►
button to display the ONE-SHOT REC SETUP menu.
12. Press the SHIFT (
►
) button to select “YES” or “NO”.
13. Press the SHIFT (
▼
) button to set the One-Shot interval.
14. Press the SHIFT
►
button to select the desired recording interval.
•
Interval mode: 01/02/03/05/10/20/30/60/off (sec)
OFF: Interval mode “OFF” means the VCR is set to receive external signals through the 1
SHOT terminal
.
15. Press the REC button.
•
The “REC” “000H” indicator is displayed on the display panel and recording starts.
•
the “1SHOT” is displayed on the monitor
.
16. To stop recording, press the STOP button.
Link (series) Recording
Using 2 VCRs or more, the link recording function lets you switch recording from one unit to the next (only
with VCRs of the same model as this one).
Link Recording Setup
5. Connect 2 VCRs or more as illustrated below.
6. Set the following items as indicated.
Item
VCR No.1
VCR No.2 and on
Cassette tape
Loaded
Loaded
Operation mode
Stop
Stop
Repeat Rec Set
NO
NO
Link Rec Set
YES
YES
Timer recording
OFF (not set)
OFF (not set)
Security lock switch (SET LOCK
switch)
OFF
ON