11
When the power is restored, the recording will resume if the stop time has not yet been reached, and
“PWR” will be flashing on the display panel.
The VCR internal battery is completely charged after the VCR has been connected to an AC power
outlet for 48 hours, and it will maintain all the VCR settings memory for up to 30 days.
Set the timer recordings so that the recording time do not overlap. If they do, the one with the earliest
recording start time will have priority.
•
If the cassette tape is ejected while timer recording is set, the buzzer will be hear 5 times (when the
buzzer function is set to “YES”).
Alarm Recording
Alarm Recording Setting
Alarm recording is performed when there is an input (trigger) at the ALARM IN terminal, “
” is displayed
on the display panel.
10. Mark all necessary connection.
11. Press the MENU, SHIFT
▼
, SHIFT
►
button in sequenze to display the REC MODE SETUP menu.
12. Press the SHIFT
▼
button until the arrow mark (
►
) point to Alarm Rec Setup.
13. Press the SHIFT
►
button to display the ALARM REC SETUP menu.
14. Press the SHIFT
►
button to select “YES” or “NO”.
YES
The alarm recording takes place when there is alarm trigger input
.
NO
The alarm recording does not take place
.
15. Press the SHIFT
▼
button to set the Alarm speed.
16. Press the SHIFT
►
button to select the desired recording speed.
06H
06-hour mode recording
30H
30-hour mode recording
17. Press the SHIFT
▼
button to set the alarm duration.
18. Press the SHIFT
►
button to select the desired recording duration.
•
Auto: Recording as long as the alarm signal is being input.
•
03/05/10/15/20/25/30/T-end MIN: Recording for the set during (MIN: MINUTE).
•
T-END: Recording until the tape end is reached when there is alarm trigger input (Note: In the case
T-END of duration mode set, Repeat recording cannot be performed).
.
Program 1
Program 2
Program 3
These portions will not
be recorded.
