Fermo
immagine
Rallentatore 1
Rallentatore 2
Rallentatore 3
Riproduzione
Avanti 1
Avanti 2
Indietro 1
Indietro 2
UTILIZZO DEL COMMUTATORE
Il commutatore è il selettore esterno. Quando il VCR è in modalità STOP, se l’utente ruota il commutatore
verso sinistra o verso destra e lo rilascia, il VCR attiva la funzione REWIND (riavvolgi) o FAST FORWARD
(avanti veloce). Quando è attiva la modalità REWIND (riavvolgi) o FAST FORWARD (avanti veloce), l’utente
può ruotare e tenere il commutatore per accedere alla modalità LOGIC SEARCH (ricerca logica). Rilasciare
il commutatore per tornare alla modalità REWIND (riavvolgi) o FAST FORWARD (avanti veloce).
MODALITÀ FERMO IMMAGINE
Quando è attiva la funzione fermo immagine, l’utente può visualizzare il video a velocità diverse, anche al
rallentatore, ruotando e posizionando il commutatore su diversi punti. La figura a destra descrive le opzioni
previste secondo la posizione in cui si trova il commutatore. Il VCR torna in modalità fermo immagine
quando l’utente rilascia il commutatore.
CARATTERISTICHE DEL COMMUTATORE
- Modalità fermo immagine: ruotare avanti o indietro il commutatore per regolare la velocità da lenta a ricerca
(riproduzione normale, riproduzione a velocità doppia).
- Modalità stop: ruotare e rilasciare il commutatore per riavvolgere o far avanzare velocemente il nastro.
- Modalità di riproduzione normale: ruotare il commutatore avanti per attivare la riproduzione a velocità
doppia e la ricerca in avanti (la stessa funzione può essere attivata ruotando all’indietro il commutatore).