10
button, to set the desired day of the week. With each press of the SET – (or +), the day will
ch’ange as indicated below
.
SET -: <-------- direction, SET +: --------> direction
→
SUN
↔
MON
↔
TUE
↔
WED
↔
THU
↔
FRI
↔
SAT
↔
DLY
←
25. Press the MENU button three times, the normal screen is displayed.
26. Press the Power/timer button.
The timer recording indicator “
” will light on the display panel.
The VCR is now in timer recording stand-by mode.
Example 2: To record on every day from 10:00 to 18:00, in 24-hour mode (recording speed).
4. Repeat steps 1-3.
5. Press the SHIFT
▼
button, until the cursori s on “DLY”.
The MENU below is displayed.
6. Repeat steps 5 to 13.
Programmed time recording Example 2
o
To modify, cancel timer recording, press the Power/timer button to cancel the timer recording mode
.
Changing a Program Timer Recording
5.
Press the MENU, SHIFT
▼
, SHIFT
►
, SHIFT
►
buttons in sequence to display the TIMER
PROGRAM SETUP menu.
6.
Press the SHIFT
►
(or
▼
) button, until the cursori s located in the settino to correct.
7.
Per correggere l’impostazione, premere il tasto SET – o + (imposta).
•
Press the MENU button three times until the normal screen is displayed
.
8.
Press the Power/Timer button.
To Cancel a Program Timer Recording
6.
Repeat steps 1 above.
7.
Press the SHIFT
►
(or
▼
) button until the cursori s located in the “Y” corresponding to the timer
recording to cancel.
8.
Press the SET – (or +) to select “N”.
9.
Press the MENU button three times until the normal screen is displayed.
10.
Press the Power/Timer button.
•
The Clear button can erase the programmed timer programmed timer recording in the line that the
cursor is located
.
Notes…….
•
During timer recording all the buttons on the VCR, except the STOP during timer recording, the
recording will stop. Durino timer recording press the Power/timer button if the buttons do not
respond.
•
If there is a power loss, the recording will be interrupted.