17
6. Move the arrow mark (
►
) to the FF or REW in the Index Search mode as you want to search.
7. Press the
►
button to search forward o in backward.
•
The display returns to the normal screen.
•
The VCR will advance (or rewind) the tape at high speed and playback the 5 seconds of
every normal recording.
•
To cancel the Index Search mode, press the STOP button.
8. While the desired recording is being played back, press the PLAY button.
•
Playback will start, and Index Search is cancelled.
o
If the Index Search mode, SHIFT
►
button should be used to search forward or in backward (Index
FF/REW).
o
Please note that when you press CUE 7 button for the quick FF, you can see the noise band on the screen.
o
This is not a defect, but a transient phenomenon and this noise will be disappeared soon.
Other Functions
Tape Counter (Zero Search)
Using the counter, it is easy to find a desired recording.
7. Press the CLEAR button, at the beginning of the desired recording.
•
The counter will be reset to “0H 00M 00S” (on screen).
•
The counter will be reset to “0H 00M” (on the display panel)
.
8. After recording or playback, press the Menu button to display the initial Menu.
9. Press the SHIFT
▼
button to move the arrow mark (
►
) to Search Select.
10. Press the SHIFT
►
button to display the SEARCH SELECT menu. The SEARCH SELECT menu is
displayed.
11. Press the SHIFT
▼
button to move the arrow mark (
►
) to Zero Search.
12. Press the SHIFT
►
button to search the counter “0H 00M 00S” (“0H 00M” on the display panel).
•
The display returns to the normal screen
.
•
The tape is rewound or advanced to the counter “0H 00M 00S” recording (“0H 00M” on the
display panel)
.
o
When you insert a cassette, the counter always resets to Zero
.
o
There is no tape counter indication for the blank portions of tape
.
o
In the 2-hour recording speed mode only, the tape counter indicates real hours, minutes and seconds
.
o
There may be slight discrepancy between the position shown on the tape counter and the actual tape
position
.
o
When rewinding the tape past the “0H 00M 00S” (“0H 00M” on the display panel),a minus (-) displayed
.
Setting the Security Lock (Set Lock).
The security lock function is designed to prevent accidental stopping of recording if the STOP button is
pressed inadvertently.
3. Set the SET LOCK switch to “ON” position.
•
“
” is displayed on the display panel.
4. To cancel the security lock, se the SET LOCK switch to “OFF” position.
•
“
” will be erased from the display panel.
Setting the Trigger Out Terminal Output
