9
o
If you change the recording speed during recording, noise or missing signal may result
.
o
During pause, the image appears on screen but it is not recorded.
o
If a recording pause continues for 5 minutes or more, the VCR will go into stop mode to avoid
damage to the tape
.
Program Timer Recording
There are two program timer recording methods, daily recording or recording on certain days of multiple
weeks (weekly recording).
Example 1: To record on every Thurday from 10:00 to 18:00, in 24-hour mode (recording speed).
14. Make sure that the set date and time are correct.
15. Load a cassette tape with erasure prevention tab in place.
16. Press the MENU, SHIFT
▼
, SHIFT
►
, SHIFT
►
button in sequence to display the TIMER PROGRAM
SETUP menu.
•
The white block cursor is on “SUN (Sunday)
.
17. Press the SHIFT
▼
button, until the cursor in on “THU”.
18. Press the SHIFT
►
button.
•
The cursor is moved to the recording start hour position
.
19. Press the SET – (or +) button to set the recording start hour (ex. 10), then press the SHIFT
►
button.
•
The cursor is moved to the recording start minutes position
.
20. Press the SET – (or +) button to set the recording start minute (ex. 00), then press the SHIFT
►
button.
•
The cursor is moved to the recording stop hour position
.
21. Press the SET – (or +) button to set the recording stop hour (ex. 06), then press the SHIFT
►
button.
•
The cursor is moved to the recording stop minutes position
.
22. Press the SET – (or +) button to set the recording stop minutes (ex. 00), then press the SHIFT
►
button.
23. Press the SET – (or +) button to select the recording speed (ex. 24), then press the SHIFT
►
button.
•
The cursor is moved to the Y/N position
.
o
If the set stop time is earlier than or the same time as the set start time, the VCR will consider the
stop time to be the following day
.
24. Press the SET – (or +) button to select “Y”.
Y
Recording will take place
N
Recording will not take place
Programmed time recording Example 1
•
Repeat steps 4 to 13 to program timer recordings for other days of the week.
•
To set one or more timer recordings the same day of the week, press the SHIFT
▼
button, until
the cursor is located in the day of the week for the second recording, then press the SET – (or +)
