8
6. Premere il tasto SET – o + (imposta) per impostare su YES le seguenti funzioni:
ORA
Permette di visualizzare l’orario.
DATA
Permette di visualizzare il mese, il giorno e l’anno.
CONTATORE FRAME
Permette di visualizzare il numero di frame.
CONTATORE EVENTI DI ALLARME
Permette di visualizzare il numero degli eventi di allarme.
CONTATORE
Permette di visualizzare il contatore
TITOLO
Permette di visualizzare il titolo
•
È possibile utilizzare fino a 20 caratteri (lettere, numeri e spazi)
.
7. Premere il tasto SHIFT
►
(sposta) per impostare la posizione della visualizzazione.
8. Premere il tasto SET – o + (imposta) per impostare la posizione dell’ora, della data, del contatore dei
frame, del contatori degli eventi di allarme su “L-Bottom (in basso a sinistra) o R-Bottom (in basso a
destra)”.
•
Una volta impostata la posizione di uno dei 4 elementi, la posizione dei 4 elementi cambia nello
stesso modo
.
9. Premere il tasto SET – o + (imposta) per impostare la posizione del contatore e del titolo su “C-
Upper (in alto in centro), R-Upper (in alto a destra) o L-Upper (in alto a sinistra)”.
Una volta impostata la posizione di uno dei 2 elementi, la posizione dei 2 elementi cambia nello
stesso modo.
10. Premere il tasto MENU tre volte per accedere alla visualizzazione normale.
Ora il procedimento di impostazione è completo.
o
Gli elementi impostati su YES vengono registrati.
Gli elementi impostati su NO durante il passaggio 6 non vengono registrati
.