Quick Start Guide
The unit supports Video Inputs via
the 75Ω BNC connectors. Connect
cameras to the video inputs starting
from input 1.
The two rows of connectors provide
video input and loop-through support.
For consistency, DM recommend one
row is used for video inputs and the
other for loop-through connections.
Note: Remember the last piece of
equipment in line must be terminated.
The unit supports a main monitor via
BNC ‘MON A’ and a spot monitor via
BNC ‘MON B’.
Note: The DV-IP RT additionally
supports a main monitor connection via
the HDMI port.
The DV-IP Express additionally
supports a main monitor connection via
the VGA port.
The unit supports two channels of
bi-directional audio (accessible through
NetVu ObserVer). Connect the audio
equipment to the phono sockets AUDIO
IN and AUDIO OUT. The audio channel
defaults to record camera channel 1.
Note: The DV-IP RT additionally
supports real time audio per camera
channel.
The unit has an internal power supply
unit. Connect the mains lead to the
unit and then to the wall socket, or to
a fused spur connection. Check local
regulations before installation. Some
countries require an Alarm/Security
device be connected to a fused spur
and not a wall outlet socket.
Using the
IR Remote Control
The IR Remote Control offers all the control
functionality required to navigate the Configuration and
Viewer menus.
Press the MENU button to access configuration menus
via a connected local monitor. The menu will have
a red indicator highlighting the first option. Select a
main menu heading to open a drop down list of further
sub-options. Press the Down Directional button to
highlight the next menu option, press OK to open the
highlighted menu.
Press the Right Directional button to highlight the first
editable parameter on the screen.
Use the Left/Right/Up/Down Directional buttons to
move between fields.
Select OK to start editing a field (the option will be
outlined in green).
Use the Up/Down Directional buttons to change the
settings within an editable field.
Numeric fields can be edited with the Directional
buttons. Use the Up/Down Directional buttons to
increase/decrease by an increment of 1, use the
Left/Right Directional buttons to increase/decrease by
an increment of 10.
Use the OK button to accept a new setting. Use the
coloured softkeys to select the accompanying colour
option on screen. To undo changes made to any menu,
select the Refresh (Purple) option.
The following Quick Start Guide will help guide you through the initial installation,
confIguration and operation of the unit.
Use this document in conjunction with the relevant Installation & Operation Guide.
This is located on the Product CD supplied with the unit and can also be found on
the Dedicated Micros website (dedicatedmicros.com).
The unit supports 20 normally open/
closed tamper proof alarm inputs, or
one Global keyswitch input with camera
specific inputs configurable as entry/exit
alarms. The alarms support tamper
proof detection using 1k in line and 5K
end of line resistance.
Pin
Alarm Input Connection
1 - 20
1-20
21-25
Earth Common
The unit supports a 10/100Mbps auto-
detecting network port. Use a CAT5
cable to connect the unit to the network.
By default the unit is configured for
DHCP (where the unit is automatically
allocated an IP address from the
network DHCP server).
The DNS (Dynamic Name Servers)
function is also supported.
Note: The DV-IP RT additionally
supports a 1Gb Network Connection
(via port ‘NET 1’). Use ‘NET 2’ for
10/100Mbps connections.
The unit supports up to four 24V 200mA
relays.
Pins
Connection
1 / 6
Relay 1 signal
2 / 7
Relay 2 signal
3 / 8
Relay 3 signal
4 / 9
Relay 4 signal
Accessing The Configuration Menus
The unit can be configured either on the local monitor or over the network using a
PC with Internet Explorer or similar browser. Both interfaces are near identical.
Accessing the Configuration menus on a local monitor
The Configuration pages can be displayed on the local monitor by pressing the
MENU button on the IR Remote Control.
Note:
If the IR Remote Control does not open the menu, press the DVR button to
make sure it is in DVR mode, then press the MENU button.
Accessing the Configuration menus via a PC web browser
The IP address of the unit is required to access the webpages. The DHCP assigned
address can be identified via the local menu pages. Using the local monitor, press
the MENU button on the IR Remote Control and navigate to the System menu.
The DHCP IP address will be displayed. A fixed IP address can be assigned via the
Network menu.
To access the unit via DNS, the default address will be:
<machine serial number>.<yourdomain>.com
The <
machine serial number>
is displayed on the underside of the unit (and on
the System menu page)
<
yourdomain>
relates to the name assigned to your DNS network.
The default DNS address can be renamed via the Network menu.
1. Launch Internet Explorer (or other web browser package).
2. Type the URL for the unit.
3. The opening menu page will be displayed.
Installing The Unit
When accessing the Configuration
menus, the menu tree will be displayed.
Relevant menus can be accessed
directly via the coloured softkey options
shown at the base of each menu.
The options available will depend
on the menu being viewed. Select a
softkey option by pressing either the
corresponding button on the IR Remote
Control (if viewing the menus locally),
or by selecting the relevant option via
the mouse (if viewing the
webpages).
Navigating The Configuration Menus
Note:
Any changes are automatically saved when the page is closed. To ‘manually’
save changes, select the Save option.
Softkey Guidance
The IR Remote Control and optional Keyboard have a common user interface.
In addition to the direct action keys (rewind, fast forward etc.) there are coloured
Softkeys that are context sensitive and enable rapid access to required functions.
To bring up context sensitive Softkey functions at any time, press any of the
coloured keys on the IR Remote Control or Keyboard.
Connect the IR Remote Control
Extender to the IR Input socket. This
must be connected to successfully use
the IR Remote Control.
