77
Setting the IP Interface Network Address
setting will depend on how your network is designed. Be sure to select the
Apply
button before exiting this screen.
8. From the bottom of the column on the left, select the
Logout
option.
9. After disconnecting the Station Transponder Unit from the computer, cycle power
on the unit to make the new IP address take effect.
Caution!
Never use the
Network Services Settings
or
Advanced
Network Settings
options found at the bottom of the Network
Configuration window. Changing any of the settings found in
these two sub-windows could prevent the system from working.
Tip
Always use the
Logout
option to quit a programming session.
Leaving the programming mode in any other manner can cause
unpredictable results.
!
Summary of Contents for 025-9581M
