ZETRON 025-9581M, Installation And Maintenance Manual

Page: 50 / 196

Creating the System Servers
50 025-9581M
UBAM Listener
There are no special requirements for the machine running the UBAM Listener utility.
The machine should be connected to the network in order to perform the UBAM Listener
utility installation.
If the total number of subnets used does not exceed 10, the UBAM Listener may be
installed on the same machine as the VoIP Gateway Server. If the UBAM Listener utility
is not installed on the same machine as the VoIP Gateway Server, it should be installed on
a machine that is connected to the same subnet as the VoIP Gateway Server.
♦
UBAM Listener Installation
1. Insert the IP FSA Suite CD in the computer’s CD or DVD drive. The installation
routine should start automatically and display the opening screen. (If it does not,
use the
RUN command on the Start menu to browse the CD-ROM root directory,
select the Autorun.exe file, and run it.)
2. From the opening screen, select the FSA VoIP Installation menu, select the
UBAM Listener option, and click the Install 'UBAM Listener' button. The
installer for the UBAM utility will start.
3. Follow the on-screen instructions of the installer.
4. When the installation is complete, you may remove the CD-ROM from the drive.
5. Click on the Windows
Start button. Locate the UBAM Listener Console
application and start it. The window that opens will display the IP address of the
computer running UBAM Listener and the port the application is using. Copy
down the address displayed in that window. It is used to configure any instance of
UBAM Repeater that will connect back to this instance of Listener.
6. Click the Done button to close the window.
Note Before installing any of the UBAM Utilities software, ensure that
Windows is properly configured. See
Preparing the Console
Computer
on page 37.
Note The UBAM Listener runs in the background as a Windows service.