manualshive.com logo in svg

ZETRON 025-9581M, Installation And Maintenance Manual

Share
Download
ZETRON 025-9581M Installation And Maintenance Manual Download Page 37

Overview

37

Creating Console Positions

Overview

This chapter covers the installation of the FSA Console application onto the computers 
that are used in the dispatch center to create individual operator positions. 

It covers the installation of the console application and the loading of the license file that 
keeps the application working.

If you actually looking for information on configuring the FSA Console application once 
the software is up and running on a computer, please see 

Configuring the FSA Console

 on 

page 81.

Preparing the Console Computer

Disabling Security Features

Several security features in Windows XP and Windows 7 must be or should be disabled.

♦

To set Data Execution Prevention (DEP) to OptIn (Windows 7 only)

1. Click the Windows 

Start

 button.

2. Type 

cmd

 and press 

CTRL-SHIFT-ENTER

. This opens a command prompt 

window with administrator rights.

3. At the command prompt, type the following command and press 

Enter

.

bcdedit /set nx “optin”

4. Close the command prompt window.

Summary of Contents for 025-9581M





































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands