ZETRON 025-9581M, Installation And Maintenance Manual

Page: 13 / 196

13
Related Documentation
Related Documentation
Overall System Operation
The IP FSA system uses a client-server architecture to receive commands and then direct
them to the appropriate fire stations.
Figure 1 provides an example of the basic system.
The core of the system is made up of the following:
• FSA Server
• FSA Console client application running on the dispatch position computer
• One Model 6203 Station Transponder Unit installed at each fire station in the
system (optionally, one Model 6204 unit d also be installed at each fire station to
support additional units)
Title P/N Description
Fire Station Alerting
Installation and Maintenance 025-9581 Describes how to install and maintain the IP FSA
System.
Fire Station Alerting Operation 025-9582 Describes how to operate the IP FSA System.
Fire Station Alerting
XML CAD Protocol 025-9583 Defines the functional and protocol messages used
for communications between a third-party CAD
application and the Zetron FSA Server service.
Installing the VoIP Intercom Option 011-0741 Describes how to add a VoIP Intercom board to a
Model 6, Model 6203, or Model 6204.
Model 6 Upgrade for FSA Compatibility 011-0742 This application note covers installing the
components of the upgrade package 950-0839 on an
existing Model 6 Station Transponder.
Note FSA Server should be running on a computer dedicated to FSA-
related software. This computer should not be running any third-
party software or other Zetron software that is not related to FSA.