ZETRON 025-9581M, Installation And Maintenance Manual

Page: 61 / 196

61
Serial Port Programming
7. Press “ 4 ” to open the Communication Mode menu and “ 4 ” again to set the
Communication Mode to COR, TX on COR Low . Press “ e ” to return to the
Station Configuration menu.
8. Enter a “ 5 ” and set the keyup delay to 0.10 seconds (for a system using VoIP, if the
system uses radio to handle voice you will need to set this delay longer). When you
are finished, enter “
e ” to return to the top menu.
9. From the top menu, enter a “ 5 ” to open the PA Options menu. Confirm that the
number “ 3 ” option, PA Un-Muted Mode , is Enabled . Enable it if necessary.
When you are finished, enter an “ e ” to return to the top menu.
Note The options and settings available from this menu are not available
in the FSA Maintenance Utility. If you intend to use these
capabilities of the Model 6203 in your system, then you
must
make the settings here.