MAXinBOX FC 0-10V VALVE
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
17
the project topology. Ventilation mode can also activate through
scenes
(please refer to section 2.5.1.4).
Alarms
: enables or disables the alarm functions (see section 2.5.1.1).
Forced Position
: enables or disables the forced position function (see
section 2.5.1.2).
Purge
: enables or disables the purge function (see section 2.5.1.3).
Scenes
: enables or disables the scene functions (see section 2.5.1.4).
There are some other objects that will be available or not depending on the above
parameters:
2 tubes
4 tubes
Object
Cooling
Heating
Both
“[FCV1] H/C Mode”
√
√
“[FCV1] H/C Mode (Status)”
√
√
“[FCV1] Cooling Input Control Signal”
√
√
√
“[FCV1] Heating Input Control Signal”
√
√
√
“[FCV1] Valve (Status)”
√
“[FCV1] Cooling Valve (Status)”
√
√
“[FCV1] Heating Valve (Status)”
√
√
Table 2
Fan Coil communication objects depending on the Type and Mode.
Note
:
the last three objects will change their names in case the valve control has been
set to remote instead of local
:
Local
Remote
“[FCV1] Valve (Status)”
“[FCV1] Valve Control Signal”
“[FCV1] Cooling Valve (Status)”
“[FCV1] Cooling Valve: Control Signal”
“[FCV1] Heating Valve (Status)”
“[FCV1] Heating Valve: Control Signal”
Table 3
Valve status / control objects.
Regarding the functionality of all these objects:
