MAXinBOX FC 0-10V VALVE
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
15
ETS PARAMETERISATION
Figure 6
Fan Coil – Configuration.
The Configuration screen (see Figure 6) is accessible by default after enabling the Fan
Coil function. It contains the following parameters:
PIPE CONFIGURATION
Type of Fan Coil
: “2 pipes” or “4 pipes”. If “2 pipes”, it is necessary to define
the available HVAC modes:
HVAC Mode
: “Cooling”, “Heating” or “C Heating”. This
parameter is only available for two-pipe fan coils (in the case of four-
pipe fan coils, both modes are assumed to be available). If set to
“C Heating”, a binary object (“
[FCV1] H/C Mode
”) will be
provided to switch the current mode at any time, as well as the
corresponding status object.
VALVE CONTROL CONFIGURATION
Valve Control Type
: “Local” (default option) or “Remote”.
