MAXinBOX FC 0-10V VALVE
http://www.zennio.com
Technical Support:
http://zennioenglish.zendesk.com
9
2.3
INDIVIDUAL BINARY OUTPUTS
MAXinBOX FC 0-10V VALVE incorporates
four binary outputs
, each of which can be
enabled and configured in parameters independently,
as long as they are not
required by the fan coil control module
(see section 2.5) as their typical application
in this device is controlling the different fan speeds of the fan coil (up to four).
Their parameterisation as independent binary outputs is similar to that of the individual
relay outputs of any other MAXinBOX actuators. Note that in such case they all work
independently
, although it is possible to group them as required (for example, to
switch an indicator light on when the fan is running) through joint group addresses, as
well as to configure each of them as “normally open” or “normally closed”.
Please refer to the specific manual “
Binary Outputs in MAXinBOX FC 0-10V VALVE
”
(available at the Zennio homepage,
www.zennio.com
) for detailed information.
