Zennio MAXinBOX FC 0-10V VALVE, User Manual

Page: 54 / 60

MAXinBOX FC 0-10V VALVE
http://www.zennio.com Technical Support: http://zennioenglish.zendesk.com
54
162, 167
100, 105,
110, 129,
134, 139,
158, 163, 168
1 Bit I C - - W - DPT_Switch 0/1 [Ix] [Cy] Channel Lock According to parameters
101, 106,
111, 130,
135, 140,
159, 164, 169
1 Bit I C - - W - DPT_Switch 0/1 [Ix] [Cy] Force State 0 = No Detection; 1 = Detection
199 1 Byte I C - - W - DPT_SceneControl 0-63; 128-191 [Outputs] Scenes 0 – 63 (Execute 1 – 64); 128 – 191 (Save 1 – 64)
200, 208,
216, 224
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.O. (0=Open Relay; 1=Close Relay)
1 Bit I C - - W - DPT_BinaryValue 0/1 [Ox] On/Off N.C. (0=Close Relay; 1= Open Relay)
201, 209,
217, 225
1 Bit O C T R - - DPT_BinaryValue 0/1 [Ox] On/Off (Status) 0=Output Off; 1=Output On
202, 210,
218, 226
1 Bit I C - - W - DPT_Enable 0/1 [Ox] Lock 0=Unlock; 1=Lock
203, 211,
219, 227
1 Bit I C - - W - DPT_Start 0/1 [Ox] Timer 0=Switch Off; 1=Switch On
204, 212,
220, 228
1 Bit I C - - W - DPT_Start 0/1 [Ox] Flashing 0=Stop; 1=Start
205, 213,
221, 229
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Normal; 1=Alarm
1 Bit I C - - W - DPT_Alarm 0/1 [Ox] Alarm 0=Alarm; 1=Normal
206, 214,
222, 230
1 Bit I C - - W - DPT_Trigger 0/1 [Ox] Unfreeze Alarm Alarm=0 + Unfreeze=1 => End Alarm
207, 215,
223, 231
1 Bit O C T R - - DPT_Trigger 0/1 [Ox] Warning Time (Status) 0=Normal; 1=Warning
232, 238,
244, 250
1 Bit I C - - W - DPT_Switch 0/1 [Ix] Input Lock 1 = Locked; 0 = Unlocked
233, 239,
245, 251
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Short Press] 0 Sending of 0
1 Bit C T - - - DPT_Switch 0/1 [Ix] [Short Press] 1 Sending of 1
1 Bit I C T - W - DPT_Switch 0/1 [Ix] [Short Press] 0/1 Switching Switching 0/1
1 Bit C T - - - DPT_UpDown 0/1 [Ix] [Short Press] Move Up Shutter Sending of 0 (Up)
1 Bit C T - - - DPT_UpDown 0/1 [Ix] [Short Press] Move Down Shutter Sending of 1 (Down)
1 Bit C T - - - DPT_UpDown 0/1 [Ix] [Short Press] Move Up/Down Shutter Switching 0/1 (Up/Down)
1 Bit C T - - - DPT_Step 0/1 [Ix] [Short Press] Stop/Step Up Shutter Sending of 0 (Stop/Step Up)
1 Bit C T - - - DPT_Step 0/1 [Ix] [Short Press] Stop/Step Down Shutter Sending of 1 (Stop/Step Down)
1 Bit C T - - - DPT_Step 0/1 [Ix] [Short Press] Stop/Step Shutter (Switched) Switching of 0/1 (Stop/Step Up/Down)
4 Bit C T - - - DPT_Control_Dimming
0x0 (Stop)
0x1 (Dec. by 100%)
0x2 (Dec. by 50%)
[Ix] [Short Press] Brighter Increase Brightness