ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
29
3.3. LOGICAL FUNCTIONS
This section in ACTinBOX MAX6 is meant to perform binary logic operations with incoming
data from the KNX bus, to send the result through other communication objects specifically enabled
in the actuator for this operation.
Up to 10 different logical functions
can be enabled, independent of each other, which can carry
out
up to 4 operations
each. To use any of them, it is necessary to enable them in the following
ETS window, which appears when selecting “Yes” in the Logical Functions box of the ACTinBOX
MAX6 General window.
Figure 3.18. Logical functions
To obtain detailed information about the use and ETS parameterization of logical functions, please
consult the specific documentation “
Logical functions X10
”, available at
http://www.zennio.com
.
