ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
5
2. CONFIGURATION
2.1. INDIVIDUAL OUTPUTS
ACTinBOX MAX6 has
6 relay outputs
that allow the control of different charges
autonomously. Each output can be enabled or disabled independently.
Every individual output can be configured as
normally open
(the output is ON when its relay
closes) or
normally closed
(the output is ON when its relay opens).
Besides the type, ACTinBOX MAX6 allows the configuration of the following functionalities of the
individual outputs:
Timers.
This section is meant to control the outputs by means of a timer, setting times for
the ON and OFF of the output.
Scenes.
Allows running and/or saving a specific action over the output/s where this
function is enabled. The status of the outputs will vary depending on the action set by the
parameterized scene.
Alarm.
Allows changing the output status where this function is enabled. It can be
configured the status on which the output will be set both for the alarm activation and for the
alarm deactivation.
Note:
The alarm has priority over the rest of functionalities.
Start-up configuration
Default or custom.
All these configuration options are explained in detail in the section 3. ETS Parameterization.
