ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
33
Besides these configuration options, it is necessary to define the parameter "
Slats specific
position
" in the enabled functions of the blind channel where to parameterize concrete positions.
These functions are:
Scenes.
Response: Specific position. The position percentages of the blind and slats
can be configured independently.
Alarms.
Response: Specific position. Same as before.
Direct positioning.
Configuration of the positions 1 or 2 (depending on the
parameterized number), in percentage, of the blind and slats independently.
Start-up configuration
Initial position: Specific position. The position percentages of
the blind and slats can be configured independently.
To obtain more detailed information about configuration and options oof the functions of the shutter
channels, please read the section 3.2.2 of this manual.
