ZENN
iO
AVANCE Y TECNOLOGÍA
vwww.zennio.com
12
Below the associated functions of every output:
Timers:
allow timing the outputs, through a simple timer and/or a flashing.
Figure 3.5. Timers screen: Simple timer
Simple timer
Allows controlling the ON/OFF of the outputs by means of a timer when
an ON (“1”) or OFF (“0”) order is received through the object “[OX] Timer”.
On Delay:
time to pass since the ON order is sent (through the object “[OX]
Timer”) and the ON response in the output takes place. If no delay is needed, please
set 0 in this field.
Off delay:
time to pass since the OFF order is sent (through the object “[OX]
Timer”) and the OFF response in the output takes place. If no delay is needed,
please set 0 in this field.
On Duration:
time the output remains ON before recovering the OFF status. A 0
set in this field means the output will remain always ON, no timing is applied in the
output.
These parameters are used in the timer as follows:
-
When ACTinBOX MAX6 receives a "1" value through the communication object "[OX]
Timer", an ON order is sent to the output, applying the On Delay and the On Duration (if a
value different from 0 has been parameterized in these fields).
-
When ACTinBOX MAX6 receives a "0" value through the communication object "[OX]
Timer", an OFF order is sent to the output, applying the Off Delay (if a value different from
0 has been parameterized in this field).
