Zelmer ZMM4200 Series, User Manual

Page: 14 / 48

14
WARNING!
Risk of property damage
●
Do not disconnect the plug from the socket by pulling
the power cord.
●
Always plug the appliance to the mains (AC only) with
voltage corresponding to that indicated on the rating
plate.
●
Do not expose the appliance to temperatures above
60°C. The appliance can be damaged.
●
Use the pusher only when pushing the food. Using
objects other than the pusher may cause damage to
the mincer and the motor.
●
Do not overload the appliance with too much product
or by pushing too hard with the pusher.
●
Carefully assemble the mincer unit, as the improper
assembly results in poor mincing quality and may
cause the knife and the screen to blunt. Replace the
blunt cutter or screen with the new ones.
●
Do not obstruct the ventilation openings in the housing
during operation.
●
Do not place the appliance on a soft surface.
●
Do not immerse the appliance drive unit in water and
do not wash it under running water.
●
Do not wash accessories when mounted on the
drive unit. Do not use abrasive cleaning agents such
as emulsions, creams, pastes, etc. for cleaning the
appliance housing. They may remove graphical
symbols, such as scales, markings, warning signs, etc.
TYPES OF ZELMER MINCERS
The table below shows a range of accessories available for the mincers and covered by this user manual.
VIB
Accessories
Mincer unit No. 8 Shredder Juicer Burr grinder
ZMM4280*
● ● ● ●
ZMM4282*
● ○ ● ○
ZMM4283*
● ●
/Two cutting drums available
● ○
ZMM4248*
● ● ○ ○
ZMM4288*
● ○ ○ ○
*appliance colour,
●
– basic accessories,
○
– additional accessories available in shops
HINT
Information on the product and
hints on its use
●
This appliance is intended for domestic use only.
●
Unplug the appliance after you finish using it. Put away
the cord, pushing it gently through the opening and
place the plug in the compartment.
●
If the appliance cannot be switched on, bring it to
a service centre.
●
Separate the meat to be minced from bones, sinews,
gristles and veins.
●
Cut large portions of the product into smaller pieces
before mincing.
●
Do not grind dry poppy seed. The poppy seed must
be scalded and soaked for dozen or so hours before
mincing.
●
Use a soft brush for cleaning the metal parts.
●
Do not wash the metal parts in dishwashers. Abrasive
detergents used in dishwashers may cause the metal
parts to become dark. Wash them manually using
traditional washing-up liquids.
Technical data
The technical parameters are given on the rating plate of the
product.
Maximum time of non-stop operation: 10 minutes
An interval between repeated operation: 30 minutes
Noise level (L
WA
): 77 dB(A)
MBP – Motor Blocked Power 1900 W
Appliance description
The foodstuff mincer consists of:
1 Drive unit – each drive unit is designed to work with each
mincing unit and shredder manufactured by ZELMER.
There are ventilation openings in the rear cavity of the
drive unit compartment.
Mincer unit consisting of:
A 2 Mincer body
3 Feed screw with attached coupling
4 Double-side cutter
5 Screen with 4 mm holes
6 Threaded ring
7 Tray
8 Pusher