Zeiss VISULAS green, Manual

Page: 67 / 116

Documentation set 7 Software description
VISULAS green 7.6 "Document" work step
000000-2096-101-DokS-GB-181218 67 / 116
Item Icon/Name Explanation
7 Multi-spot sequence Perform settings for multi-spot sequences (see Section Configure
the multi-spot sequence [
}
62]).
8 Titrate Switch to Titrate mode. The laser power in Single-spot mode can
be optimized here.
9
Reset
Reset the laser spot counter to zero.
10
Energy density
Displays the energy density (laser fluence) of the laser beam at
the point to be treated. Energy density is a measure of thera-
peutic effect on the eye.
11
Laser pulse counter
Displays the number of triggered laser pulses.
12
Laser spot size
Displays the set laser spot size if no contact lens has been
selected.
If a retina therapy and contact lens have been selected, the laser
spot size on the retina is displayed (marked with "@ Retina").
If a glaucoma therapy and contact lens have been selected, the
laser spot size at the point of therapy is displayed (marked with
"@ Target").
13 Trigger Displays the selected trigger.
Manual trigger
Manual trigger has been selected.
14 Applicator Displays the selected applicator.
Slit lamp has been selected as the applicator.
7.6 "Document" work step
In the "Document" work step the treatment parameters of the
completed treatment are displayed.
Upon selection of the eye to be treated (OD - right eye, OS - left
eye) a schematic view of the eye to be treated will be displayed on
the right-hand side of the window. The areas of the eye to be
treated can be marked by tapping on the screen.
The central area F (fovea) may be tapped in the retina therapy
report. This will activate a zoom function and an enlarged view of
the fovea will be displayed.