Zeiss VISULAS green Manual Download Page 65

Page: 65 / 116

Documentation set

7 Software description

VISULAS green

7.5 “Treat” work step

000000-2096-101-DokS-GB-181218

65 / 116

Item

Icon/Name

Explanation

Trigger

Displays the selected trigger.

Foot trigger has been selected.

Manual trigger has been selected.

Applicator

Displays the selected applicator.

Slit lamp has been selected as the applicator.

LIO VISULAS green laser indirect ophthalmoscope has been
selected as the applicator.

Laser endoprobe has been selected as the applicator.

7.5.2 Multi-spot mode (optional)

The Multi-spot mode is only available if you are in possession of a
"VISULAS

VITE

2.0" multi-spot license and the LSL green comfort

slit lamp has been selected as the applicator.

Summary of Contents for VISULAS green





















































































































Search results

Summary of Contents for VISULAS green

Reviews:

Related manuals for VISULAS green

Brands by name

Popular brands

Zeiss VISULAS green, Manual

Search results

Summary of Contents for VISULAS green

Reviews:

Related manuals for VISULAS green

Brands by name

Popular brands