Zeiss HUMPHREY 720i, User Manual

Page: 77 / 328

TEST PARAMETERS AND STRATEGIES 4-3
REV. B 02/03 PN 51680-1 HUMPHREY FIELD ANALYZER
II -
i series
2
Select the parameter
setting. The current
setting is highlighted.
3
Repeat steps 1-2 for other parameters, then press SELECTION COMPLETE.
Standard parameters One setting for each parameter has been designated as the “standard” setting. It is
distinguished from the others by the appearance of an asterisk (*) on the parameter button.
If you want to return all settings to the standard mode, select RESET TO STANDARD.
Note: For the purpose of valid comparison, it is important to keep test parameters
consistent among different test visits for the same patient. This will maintain proper
comparability when evaluating test results from many visits. Other than test speed and
fixation monitoring, test parameters cannot be changed once testing has begun.
4.htp 3/14/03, 3:13 PM 3